Tube Coils

Stainless Steel Finned Coils

Finned tube air coils with stainless tubes, frames and headers for heating, cooling and drying air in corrosive conditions.

Stainless Steel Finned Coils

Parameter options

Available options

ParameterAvailable options
Tube material304/304L, 316/316L, 321, 2205
Tube OD9.52, 12.7, 15.88, 19.05, 25.4 mm
FinsStainless, aluminium or copper; 2 – 12 fins per inch
Rows1 – 12
Frame and headers304 or 316L
SizeTo drawing or selection sheet
SurfacePickled and passivated, bright annealed or electropolished
ConnectionsPlain ends, threaded, flanged, tri-clamp or compression fittings
TestingHydrostatic or pneumatic pressure test on every coil
CertificatesEN 10204 3.1; drawings for approval before production

Not sure which option you need? Tell us your application and we will recommend the right grade, size and finish.

Applications

  • Air heaters and coolers
  • Industrial dryers
  • HVAC and air handling units
  • Food and pharmaceutical drying
  • Marine and offshore air coils
  • Heat recovery

Quality & documentation

  • Hydrostatic or pneumatic pressure test on every coil
  • Helium leak test on request
  • Dimensional check against the approved drawing
  • Pickling and passivation after bending and welding
  • Material traceability and PMI
  • EN 10204 3.1 certificate

Frequently asked questions

Which fin material should I choose?

Aluminium fins give the best heat transfer for the cost in clean, dry air. Stainless steel fins suit corrosive, humid, food-processing or high-temperature air. Copper fins are used where high conductivity is needed.

What fin spacing (FPI) should I use?

Higher fin density, around 8–12 fins per inch, gives a compact coil for clean air. Lower density, around 2–6 fins per inch, suits dusty, greasy or frosting air because it fouls less and is easier to clean.

Can you build a replacement for an existing coil?

Yes. Send the drawing or selection sheet with tube OD, number of rows, fin spacing, finned length and height, and connection positions.

Related products

Framed Stainless Steel Coil Banks

Tube banks in a welded frame for ducts, ovens and housings.

Tube 12.7–50.8 mm · frame to drawing

View options →

Stainless Steel Helical Coils

Round helical coils for tank heating and cooling.

Tube OD 6–60 mm · coil ID 30–2000 mm

View options →

Compact Stainless Steel Helical Coils

Small helical coils for instruments, sample coolers and appliances.

Tube OD 3–12.7 mm · coil OD 15–150 mm

View options →

See all product categories →

Request a quote for stainless steel finned coils

Tell us the grade, size, finish and quantity, and we will reply with price and lead time.