Products
Stainless Steel Tube Coils
Thirteen types of stainless steel tube coils — helical, conical, pancake, serpentine, square, cage, corrugated, coaxial, finned and framed coil banks — bent, welded and pressure-tested to your drawing.
Tube Coils
Choose a coil type
Select a product to see sizes, grades, finishes and processing options.

Stainless Steel Helical Coils
Round helical coils for tank heating and cooling.
Tube OD 6–60 mm · coil ID 30–2000 mm

Compact Stainless Steel Helical Coils
Small helical coils for instruments, sample coolers and appliances.
Tube OD 3–12.7 mm · coil OD 15–150 mm

Stainless Steel Conical Coils
Tapered coils for conical tank bottoms and hoppers.
Tube OD 8–50 mm · base Ø 50–1500 mm

Flat Spiral (Pancake) Coils
Single-plane spiral coils for tank bottoms and plates.
Tube OD 6–38 mm · coil OD 100–1500 mm

Stainless Steel Serpentine Coils
Serpentine (zig-zag) coils for immersion heating and cooling panels.
Tube OD 8–50 mm · up to 6000 mm long

Square & Rectangular Stainless Steel Coils
Square and rectangular coils for square tanks and housings.
Tube OD 8–38 mm · size to drawing

Stainless Steel Cage Coils
Helical coils in a support cage for reactors and large tanks.
Tube OD 12–60 mm · coil ID 200–2500 mm

Double-Layer Stainless Steel Cage Coils
Two concentric coils in one cage for more heat-transfer area.
Tube OD 12–50 mm · 2 concentric layers

Corrugated Stainless Steel Coils
Corrugated tube coils for water heaters and storage tanks.
DN 12–50 · annular or helical corrugation

Corrugated Stainless Steel Cage Coils
Multi-turn corrugated coils in a cage for tank inserts.
DN 12–32 · multi-circuit

Coaxial (Tube-in-Tube) Coils
Tube-in-tube coils for heat pumps, chillers and marine use.
Outer tube 16–60 mm · coiled helix

Stainless Steel Finned Coils
Finned air coils for heating, cooling and drying in corrosive conditions.
Tube 9.52–25.4 mm · 2–12 FPI · 1–12 rows

Framed Stainless Steel Coil Banks
Tube banks in a welded frame for ducts, ovens and housings.
Tube 12.7–50.8 mm · frame to drawing
Surface finishes
| Finish | Description | Typical use |
|---|---|---|
| No.1 | Hot rolled, annealed and pickled; dull matt surface | Tanks, industrial equipment, thick plate |
| 2B | Cold rolled, annealed, pickled and skin-passed; smooth, semi-bright | General purpose, chemical and food equipment |
| BA | Bright annealed; highly reflective surface | Kitchenware, appliances, decorative parts |
| No.4 | Brushed with 150 – 180 grit abrasive | Kitchen equipment, elevators, architectural panels |
| HL (Hairline) | Continuous long-grain brushed finish | Elevator doors, wall cladding, furniture |
| 8K Mirror | Polished to a mirror finish | Decorative panels, signage, interiors |
Chemical composition (%, ASTM A240)
| Grade | C | Cr | Ni | Mo | Other |
|---|---|---|---|---|---|
| 304 | 0.07 | 17.5 – 19.5 | 8.0 – 10.5 | — | N 0.10 |
| 304L | 0.030 | 17.5 – 19.5 | 8.0 – 12.0 | — | N 0.10 |
| 316L | 0.030 | 16.0 – 18.0 | 10.0 – 14.0 | 2.00 – 3.00 | N 0.10 |
| 321 | 0.08 | 17.0 – 19.0 | 9.0 – 12.0 | — | Ti 5×(C+N) – 0.70 |
| 310S | 0.08 | 24.0 – 26.0 | 19.0 – 22.0 | — | — |
| 430 | 0.12 | 16.0 – 18.0 | 0.75 | — | — |
| 2205 | 0.030 | 22.0 – 23.0 | 4.5 – 6.5 | 3.0 – 3.5 | N 0.14 – 0.20 |
For reference only. Limits are maximum unless a range is shown; always refer to the latest edition of the standard and the mill test certificate.
From our workshop





Frequently asked questions
What is the difference between 2B and BA finish?
2B is a smooth, semi-bright cold-rolled finish used for most general applications. BA (bright annealed) is annealed in a protective atmosphere, giving a much more reflective surface for decorative and appliance use.
Is stainless steel sheet magnetic?
Austenitic grades such as 304 and 316L are essentially non-magnetic when annealed, but can become slightly magnetic after cold working. Ferritic grades such as 430 are magnetic.
Which grade is best for outdoor or coastal use?
316L is generally recommended for outdoor, coastal and chloride-containing environments because of its molybdenum content. For more aggressive conditions, duplex 2205 offers higher strength and corrosion resistance.
Technical guide: How to choose a stainless steel tube coil for tank heating and cooling
Technical guide: Pickling and passivation of stainless steel explained
Technical guide: Duplex 2205 vs 316L stainless steel: when to upgrade
Request a quote for sheets & plates
Tell us the grade, thickness × width × length, finish and quantity, and we will reply with price and lead time.

Parameter options
Coil design options
Not sure which option you need? Tell us your application and we will recommend the right grade, size and finish.
Request a quote for stainless steel tube coils
Tell us the grade, size, finish and quantity, and we will reply with price and lead time.