304 / 304L Stainless Steel: Composition, Properties & Equivalents

304 (UNS S30400) is the most widely used austenitic stainless steel, an 18% chromium / 8% nickel alloy with good corrosion resistance, formability and weldability. 304L (S30403) is the low-carbon version (C ≤ 0.030%) used where welding would otherwise sensitise the material. Yuhang Metal supplies 304 and 304L as pipes, tubes, sheets, plates and tube coils to ASTM, EN and JIS standards, each with an EN 10204 3.1 mill test certificate.

Quick answer: 304 is the general-purpose “18/8” stainless steel (about 18% chromium and 8% nickel) used for most food, kitchen, architectural and water applications. Choose 304L for parts that will be welded, and move up to 316L if the part will be exposed to salt or other chlorides.

Chemical composition (ASTM A240, max % unless range)

CMnSiPSCrNiN
3040.082.000.750.0450.03017.5–19.58.0–10.50.10
304L0.0302.000.750.0450.03017.5–19.58.0–12.00.10

Mechanical properties (annealed, ASTM A240 minimums)

Tensile strengthYield strength (0.2%)Elongation
304≥ 515 MPa (75 ksi)≥ 205 MPa (30 ksi)≥ 40%
304L≥ 485 MPa (70 ksi)≥ 170 MPa (25 ksi)≥ 40%

Equivalent designations

UNSENJIS
304S304001.4301 (X5CrNi18-10)SUS304
304LS304031.4307 (X2CrNi18-9)SUS304L

Typical applications

Food and beverage equipment, kitchen and sanitary ware, architectural panels and handrails, water piping, heat exchanger coils, tanks and general fabrication.

304 or 304L?

Choose 304L when parts will be welded and used as-welded without annealing: the lower carbon limits carbide precipitation at the weld, preserving corrosion resistance. Dual-certified 304/304L material meets the composition of 304L and the strength of 304, covering both cases.

Pitting resistance (PREN)

PREN (pitting resistance equivalent number) = %Cr + 3.3 × %Mo + 16 × %N. It ranks resistance to chloride pitting: the higher the number, the better. 304/304L has a calculated PREN of about 17.5–21.1, compared with about 22.6–29.5 for 316/316L. Values are calculated from the ASTM A240 composition limits. PREN is a ranking tool, not a guarantee of performance in a particular environment.

How to check you received 304 or 304L

A handheld XRF analyser confirms chromium (17.5–19.5%) and nickel (8.0% or more), which separates 304 from 201 (3.5–5.5% nickel, 5.5–7.5% manganese) within seconds. XRF cannot measure carbon, so it cannot tell 304 from 304L: check the heat analysis on the EN 10204 3.1 certificate or test with OES. Step-by-step checks are in our pre-shipment inspection guide.

Frequently asked questions

Is 304 stainless steel magnetic?

Annealed 304 is essentially non-magnetic. Cold working, such as bending, tube drawing or rolling, can make it slightly magnetic, so a magnet is not a reliable way to identify the grade.

What does 18/8 stainless steel mean?

It refers to the nominal composition of 304: about 18% chromium and 8% nickel. ASTM A240 specifies 17.5–19.5% chromium and 8.0–10.5% nickel for 304.

Can 304 be used near the sea?

It is not recommended for coastal, splash-zone or other chloride-rich environments, where it can pit and stain. Specify 316L, or 2205 duplex for more severe conditions.

304 / 304L products from Yuhang Metal

Pipes & tubes · Sheets & plates · Tube coils · Custom & OEM fabrication

Request a quotation

Send us the product form, dimensions, quantity and standard (ASTM, EN or JIS). Every delivery includes an EN 10204 3.1 mill test certificate. Request a quote.