201 (UNS S20100) is a chromium-manganese austenitic stainless steel in which part of the nickel of 304 is replaced by manganese and nitrogen. It offers a similar look and good strength at a lower, more stable price, with somewhat lower corrosion resistance than 304. Yuhang Metal supplies 201 pipes, tubes, sheets and plates for decorative and structural indoor applications.
Quick answer: 201 is a lower-nickel stainless steel in which part of the nickel is replaced by manganese and nitrogen. It looks like 304 and is stronger, but has lower corrosion resistance, so use it for dry indoor and decorative applications, not outdoors, near the coast or in contact with chlorides.
Chemical composition (max % unless range)
| C | Mn | Si | P | S | Cr | Ni | N | |
|---|---|---|---|---|---|---|---|---|
| 201 | 0.15 | 5.5–7.5 | 1.00 | 0.060 | 0.030 | 16.0–18.0 | 3.5–5.5 | 0.25 |
Mechanical properties (annealed, ASTM A240 minimums)
| Tensile strength | Yield strength (0.2%) | Elongation | |
|---|---|---|---|
| 201-1 | ≥ 515 MPa (75 ksi) | ≥ 260 MPa (38 ksi) | ≥ 40% |
| 201-2 | ≥ 655 MPa (95 ksi) | ≥ 310 MPa (45 ksi) | ≥ 40% |
Equivalent designations
| UNS | EN | JIS | |
|---|---|---|---|
| 201 | S20100 | 1.4372 (X12CrMnNiN17-7-5) | SUS201 |
Typical applications
Decorative tube and panels, furniture frames, railings and trim indoors, kitchenware, and structural parts where exposure to chlorides is limited. For outdoor, coastal or chemical exposure, specify 304 or 316L instead.
201 vs 304
201 saves cost by using manganese and nitrogen instead of part of the nickel. The nitrogen also raises its strength above 304. The trade-off is lower resistance to pitting and a slightly harder, less ductile feel in deep forming. Where the appearance budget decides and the environment is dry, 201 is a sound choice.
How to tell 201 from 304
201 and 304 look identical. A handheld XRF analyser separates them in seconds: 201 contains 3.5–5.5% nickel and 5.5–7.5% manganese, while 304 contains 8.0–10.5% nickel and no more than 2.0% manganese. A magnet is not a reliable test. Ask for the mill certificate and check that its heat number matches the material; see our pre-shipment inspection guide and why some buyers receive 201 sold as 304.
Frequently asked questions
Will 201 stainless steel rust?
In dry indoor conditions it stays bright. In humid, coastal or chemical environments it stains and pits sooner than 304, so specify 304 or 316L there.
How can I tell 201 from 304?
By composition, not appearance: an XRF analyser shows the much lower nickel and higher manganese of 201. Also check that the heat number on the mill certificate matches the material.
Why is 201 cheaper than 304?
Nickel is the most expensive of the main alloying elements in austenitic stainless steel. 201 uses roughly half as much nickel as 304 and replaces it with manganese and nitrogen.
201 products from Yuhang Metal
Pipes & tubes · Sheets & plates · Tube coils · Custom & OEM fabrication
Request a quotation
Send us the product form, dimensions, quantity and standard (ASTM, EN or JIS). Every delivery includes an EN 10204 3.1 mill test certificate. Request a quote.